Using Tengige - HP 5900 series Command Reference Manual

Examples
# Combine 10-GE interfaces Ten-GigabitEthernet1/0/49:1 through Ten-GigabitEthernet1/0/49:4 into
a 40-GE interface.
<System> system-view
[System] interface ten-gigabitethernet1/0/49:1
[System-Ten-GigabitEthernet1/0/49:1] using fortygige
The interfaces Ten-GigabitEthernet1/0/49:1 through Ten-GigabitEthernet1/0/49:4 will be
deleted. Continue? [Y/N]:y
Reboot device to make the configuration take effect.
Related commands

using tengige

using tengige
Use using tengige to split a 40-GE interface into four 10-GE interfaces.
Use undo using tengige to cancel the configuration.
Syntax
using tengige
undo using tengige
Default
A 40-GE interface is used as a single interface, and is not split.
Views
40-GE interface view
Predefined user roles
network-admin
Usage guidelines
You can use a 40-GE interface as a single interface. You can also split a 40-GE interface into four 10-GE
interfaces to improve the port density, reduce the cost, and improve the network flexibility. For example,
you can
Ten-GigabitEthernet1/0/49:1 through Ten-GigabitEthernet1/0/49:4. The 10-GE interfaces that are
split from a 40-GE interface support the same configuration and attributes as common 10-GE interfaces,
except that they are numbered in a different way.
After the configuration, the system prompts you to reboot your device, and you must reboot the device to
see the four 10-GE interfaces.
Examples
# Split 40-GE interface FortyGigE1/0/49 into four 10-GE interfaces.
<System> system-view
[System] interface fortygige 1/0/49
[System-FortyGigE1/0/49] using tengige
The interface FortyGigE1/0/49 will be deleted. Continue? [Y/N]:y
Reboot device to make the configuration take effect.
split a 40-GE interface FortyGigE1/0/49
34
into four 10-GE interfaces