Lldp Encapsulation Snap; Lldp Fast-Count - HP 5900 series Command Reference Manual

Views
Ethernet interface view
Predefined user roles
network-admin
Usage guidelines
LLDP takes effect on a port only when LLDP is enabled both globally and on the port.
Examples
# Disable LLDP on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] undo lldp enable
Related commands
lldp global enable

lldp encapsulation snap

Use lldp encapsulation snap to configure the encapsulation format for LLDPDUs as SNAP.
Use undo lldp encapsulation to restore the default encapsulation format for LLDPDUs.
Syntax
lldp encapsulation snap
undo lldp encapsulation
Default
Ethernet II is the encapsulation format for LLDPDUs.
Views
Ethernet interface view
Predefined user roles
network-admin
Usage guidelines
LLDP-CDP packets use only SNAP encapsulation.
Examples
# Configure the encapsulation format for LLDPDUs as SNAP on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] lldp encapsulation snap

lldp fast-count

Use lldp fast-count to set the number of LLDPDUs sent each time fast LLDPDU transmission is triggered.
Use undo lldp fast-count to restore the default.
186