HP 5900 series Command Reference Manual page 177

3 3
4 4
5 5
6 6
7 7
DCBX PFC subTLV info:
P0-0 P1-0
Number of traffic classes supported: 8
DCBX APP subTLV info:
ID type
APP protocol
APP protocol
TCP or UDP port
Auto-negotiation supported : No
Auto-negotiation enabled
OperMau
Power port class
PSE power supported
PSE power enabled
PSE pairs control ability
Power pairs
Port power classification
Link aggregation supported : Yes
Link aggregation enabled
Aggregation port ID
Maximum frame size
Table 37 Command output
Field
Global LLDP local-information
Chassis ID
System capabilities supported
System capabilities enabled
Device class
HardwareRev
11
14
18
21
25
P2-1 P3-1 P4-0
Protocol ID
0x8906
0x8914
23
: No
: Speed(0)/Duplex(Unknown)
: PSE
: No
: No
: No
: Signal
: Class 0
: No
: 0
: 10000
Description
Global LLDP information to be sent.
Bridge MAC address of the device.
Supported capabilities:
•
Bridge—Switching is supported.
•
Router—Routing is supported.
Enabled capabilities:
•
Bridge—Switching is enabled.
•
Router—Routing is enabled.
MED device class:
•
Connectivity device—Network device.
•
Class I—Normal terminal device. It requires the basic LLDP discovery
services.
•
Class II—Media terminal device. It supports media streams, and can
also function as a normal terminal device.
•
Class III—Communication terminal device. It supports the IP
communication systems of end users, and can also function as a normal
terminal device or media terminal device.
Hardware version.
170
P5-0 P6-0
CoS map
0x10
0x20
0xEA
P7-0