Display Link-Aggregation Member-Port - HP 5900 series Command Reference Manual

Bridge-Aggregation10 Load-Sharing Mode:
Layer 2 traffic: packet type-based sharing
Layer 3 traffic: packet type-based sharing
Table 15 Command output
Field
Link-Aggregation Load-Sharing Mode
Bridge-Aggregation10 Load-Sharing
Mode
Layer 2 traffic: packet type-based
sharing
Layer 3 traffic: packet type-based
sharing
Related command
• link-aggregation global load-sharing mode
link-aggregation load-sharing mode
•

display link-aggregation member-port

Use display link-aggregation member-port to display detailed link aggregation information for the
specified member ports.
Syntax
display link-aggregation member-port [ interface-list ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-list: Specifies a list of link aggregation member ports, in the format interface-type
interface-number [ to interface-type interface-number ], where interface-type interface-number specifies
an interface by its type and number.
Usage guidelines
For a member port in a static aggregation group, which is unaware of information about the peer group,
this command displays the port number, port priority, and operational key of the local end only.
Description
Global link-aggregation load sharing criteria.
If the default global load sharing criteria are used, this field
displays the load sharing criteria for Layer 2 and Layer 3 traffic.
Otherwise, this field displays the global load sharing criteria
configured by the user.
Link-aggregation load sharing criteria of the aggregation group
that corresponds to the aggregate interface Bridge-Aggregation
10.
If the default group-specific load sharing criteria are used, this field
displays the global load sharing criteria. Otherwise, this field
displays the group-specific load sharing criteria configured by the
user.
Default link-aggregation load sharing criteria for Layer 2 traffic. In
this sample output, the criterion is the packet type.
Default link-aggregation load sharing criteria for Layer 3 traffic. In
this sample output, the criterion is the packet type.
72