HP 5900 series Command Reference Manual page 15

Layer 2 - lan switching
Hide thumbs Also See for 5900 series:
Table of Contents

Advertisement

Field
Broadcast MAX-
Multicast MAX-
Unicast MAX-
PVID
Port link-type
Tagged Vlan
UnTagged Vlan
Last clearing of counters
Peak value of output
Peak time of output
Last 300 seconds input: 0 packets/sec 0
bytes/sec -%
Last 300 seconds output: 0 packets/sec
0 bytes/sec -%
Input(total): 0 packets, 0 bytes
0 unicasts, 0 broadcasts, 0
multicasts, 0 pauses
Input(normal): 0 packets, - bytes
0 unicasts, 0 broadcasts, 0
multicasts, 0 pauses
input errors
runts
Description
Broadcast storm suppression threshold, in percent, pps, or kbps
depending on your configuration.
Multicast storm suppression threshold, in percent, pps, or kbps
depending on your configuration.
Unknown unicast storm suppression threshold, in percent, pps, or
kbps depending on your configuration.
Port VLAN ID (PVID) of the Ethernet interface.
Link type of the interface, which can be access, trunk, or hybrid.
VLANs for which the interface sends packets without removing
VLAN tags.
VLANs for which the interface sends packets after removing VLAN
tags.
Time when the reset counters interface command was last used to
clear statistics on the interface. Never indicates that the reset
counters interface command was never used since the device was
started.
Peak value of inbound traffic (in Bps), and time of peak inbound
traffic.
Peak value of outbound traffic (in Bps), and time of peak outbound
traffic.
Average rate of input and output traffic in the last 300 seconds, in
pps and Bps, and the ratio of the actual rate to the maximum
interface rate in %.
A hyphen (-) indicates that the item is not supported.
Inbound traffic statistics (in packets and bytes) for the interface. All
inbound normal and abnormal packets and normal pause frames
were counted.
The number of inbound unicast packets, the number of inbound
broadcasts, the number of inbound multicasts, and the number of
inbound pause frames.
A hyphen (-) indicates that the item is not supported.
Inbound normal traffic and pause frame statistics (in packets and
bytes) for the interface.
The number of normal unicast packets, the number of normal
broadcasts, the number of normal multicasts, and the number of
normal pause frames.
A hyphen (-) indicates that the item is not supported.
The number of inbound packets with errors.
The number of inbound frames shorter than 64 bytes, in correct
format, and containing valid CRCs.
8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5920 series

Table of Contents