HP 5900 series Command Reference Manual page 84

# Display detailed information about the aggregation group that correspond to aggregate interface
Bridge-Aggregation 20, which is a static aggregation group.
<Sysname> display link-aggregation verbose bridge-aggregation 20
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Port Status: S -- Selected, U -- Unselected
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Aggregate Interface: Bridge-Aggregation20
Aggregation Mode: Static
Loadsharing Type: Shar
Port
--------------------------------------------------------------------------------
XGE1/0/1
XGE1/0/2
XGE1/0/3
Table 18 Command output
Field
Loadsharing Type
Port Status
Flags
Aggregate Interface
Aggregation Mode
Status Priority Oper-Key
U 32768
U 32768
U 32768
Description
Load sharing type:
•
Shar—Load sharing.
•
NonS—Non-load sharing.
Port state: Selected or unselected.
LACP state flags. This field is 1 byte long, represented by ABCDEFGH from the least
significant bit to the most significant bit. The letter is present when its bit is 1 and
absent when its bit is 0.
•
A—Indicates whether LACP is enabled. 1 indicates enabled, and 0 indicates
disabled.
•
B—Indicates the LACP short or long timeout. 1 indicates short timeout, and 0
indicates long timeout.
•
C—Indicates whether the sending system considers that the link is aggregatable.
1 indicates yes, and 0 indicates no.
•
D—Indicates whether the sending system considers that the link is synchronized.
1 indicates yes, and 0 indicates no.
•
E—Indicates whether the sending system considers that the incoming frames are
collected. 1 indicates yes, and 0 indicates no.
•
F—Indicates whether the sending system considers that the outgoing frames are
distributed. 1 indicates yes, and 0 indicates no.
•
G—Indicates whether the sending system receives frames in the default state. 1
indicates yes, and 0 indicates no.
•
H—Indicates whether the sending system receives frames in the expired state. 1
indicates yes, and 0 indicates no.
Name of the aggregate interface.
Mode of the aggregation group:
•
Static for static aggregation.
•
Dynamic for dynamic aggregation.
1
1
1
77