Display Vlan - HP 5900 series Command Reference Manual

Field
Line protocol current state
Description
The Maximum Transmit Unit
Internet protocol processing : disabled
Internet Address is 192.168.1.54/24
Primary
P Packet Frame Type
Hardware Address
IPv6 Packet Frame Type
The brief information of interface(s)
under route mode
Link: ADM - administratively down; Stby
– standby
Protocol: (s) - spoofing
Interface
Link
Protocol
Main IP
Description

display vlan

Use display vlan to display VLAN information.
Syntax
display vlan [ vlan-id1 [ to vlan-id2 ] | all | dynamic | reserved | static ]
Description
Link layer protocol state of a VLAN interface:
•
DOWN—The protocol state of the VLAN interface is down.
•
UP—The protocol state of the VLAN interface is up.
Description string of a VLAN interface.
MTU of a VLAN interface.
The interface is not capable of processing IP packets. This
information is displayed when the interface is not configured with
an IP address.
The primary IP address of the interface is 192.168.1.54/24. This
information is displayed only if the primary IP address is configured
for the interface.
IPv4 outgoing frame format.
MAC address that corresponds to a VLAN interface.
IPv6 outgoing frame format.
Brief information about Layer 3 interfaces.
Link layer state of the interface:
•
ADM—The interface has been administratively shut down. To
recover its physical state, run the undo shutdown command.
•
Stby—The interface is operating as a standby interface.
If the network layer protocol state of an interface is shown as UP,
but its link is an on-demand link or not present at all, its protocol
attribute includes the spoofing flag (which is a letter s in
parentheses).
Abbreviated interface name.
Physical link state of the interface:
•
UP—The link is up.
•
ADM—The link has been administratively shut down. To recover
its physical state, run the undo shutdown command.
Protocol connection state of the interface:
•
UP.
•
DOWN.
•
UP(s).
Main IP address of the interface.
Description of the interface.
144