Port-Based Vlan Commands; Display Port - HP 5900 series Command Reference Manual

You cannot create or remove VLANs that are reserved for specific functions.
You cannot use the undo vlan command to delete a dynamic VLAN, a VLAN with a QoS policy applied,
or a VLAN locked by an application. To delete such a VLAN, first remove the configuration from the
VLAN.
Examples
# Create VLAN 2 and enter its view.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2]
# Create VLAN 4 through VLAN 100.
<Sysname> system-view
[Sysname] vlan 4 to 100
Related commands
display vlan

Port-based VLAN commands

display port

Use display port to display information about the hybrid or trunk ports on the device, including the port
names, PVIDs, and allowed VLAN IDs.
Syntax
display port { hybrid | trunk }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
hybrid: Displays hybrid ports.
trunk: Displays trunk ports.
Examples
# Display information about the hybrid ports in the system.
<Sysname> display port hybrid
Interface
XGE1/0/4
# Display information about the trunk ports in the system.
<Sysname> display port trunk
PVID VLAN Passing
100 Tagged: 1000, 1002, 1500, 1600-1611, 2000,
2555-2558, 3000, 4000
Untagged:1, 10, 15, 18, 20-30, 44, 55, 67, 100,
150-160, 200, 255, 286, 300-302
150