Interface Vlan-Interface - HP 5900 series Command Reference Manual

Table 32 Command output
Field
VLAN type
Route interface
Description
Name
IP address
Subnet mask
Tagged ports
Untagged ports
Related commands
vlan

interface vlan-interface

Use interface vlan-interface to create a VLAN interface and enter its view or to enter the view of an
existing VLAN interface.
Use undo interface vlan-interface to delete the specified VLAN interface.
Syntax
interface vlan-interface vlan-interface-id
undo interface vlan-interface vlan-interface-id
Views
System view
Predefined user roles
network-admin
Parameters
vlan-interface-id: Specifies a VLAN interface number in the range of 1 to 4094.
Usage guidelines
Create the VLAN before you create the VLAN interface.
Examples
# Create VLAN interface 2, and enter its view.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2] quit
Description
VLAN type, static or dynamic.
Indicates whether the VLAN interface is configured.
•
Not configured.
•
Configured.
Description of the VLAN.
Name configured for the VLAN.
Primary IP address of the VLAN interface (available only when an IP
address is configured for the VLAN interface). To display secondary
IP addresses, use the display interface vlan-interface command in
any view or the display this command in VLAN interface view.
Subnet mask of the primary IP address (available only when an IP
address is configured for the VLAN interface).
Ports through which VLAN packets are sent tagged.
Ports through which VLAN packets are sent untagged.
146