HP 5900 series Command Reference Manual: Vlan Mapping

Layer 2 - lan switching.
Hide thumbs

Advertisement

Table 36 Command output
Field
Interface
Outer VLAN
Inner VLAN
Translated Outer VLAN
Translated Inner VLAN
Related commands

vlan mapping

vlan mapping
Use vlan mapping to configure VLAN mapping on an interface.
Use undo vlan mapping to cancel the VLAN mapping configuration.
Syntax
vlan mapping { vlan-id translated-vlan vlan-id | nest { range vlan-range-list | single vlan-id-list }
nested-vlan vlan-id | nni | tunnel outer-vlan-id inner-vlan-id translated-vlan outer-vlan-id inner-vlan-id |
uni { range vlan-range-list | single vlan-id-list } translated-vlan vlan-id }
undo vlan mapping { vlan-id translated-vlan vlan-id | all | nest { range vlan-range-list | single
vlan-id-list } nested-vlan vlan-id | nni | tunnel outer-vlan-id inner-vlan-id translated-vlan outer-vlan-id
inner-vlan-id | uni { range vlan-range-list | single vlan-id-list } translated-vlan vlan-id }
Default
VLAN mapping is not configured on an interface.
Views
Ethernet interface view, aggregate interface view
Predefined user roles
network-admin
Parameters
vlan-id translated-vlan vlan-id: Specifies the original VLAN and translated VLAN for one-to-one VLAN
mapping. The vlan-id argument is in the range of 1 to 4094. The original VLAN and the translated VLAN
cannot be the same.
uni range vlan-range-list translated-vlan vlan-id: Configures many-to-one VLAN mapping on the
customer-side port by specifying the original VLAN ranges and the translated VLAN. The vlan-range-list
argument is specified in the format of { vlan-id1 to vlan-id2 }&<1- 1 0>, where vlan-id2 must be greater
than vlan-id1 and &<1- 1 0> indicates that you can specify up to ten { vlan-id1 [ to vlan-id2 ] } parameters.
The vlan-id argument is in the range of 1 to 4094. Make sure that different VLAN ranges do not overlap.
Any of the original VLANs cannot be the same as the translated VLAN.
uni single vlan-id-list translated-vlan vlan-id: Configures many-to-one VLAN mapping on the
customer-side port by specifying the original VLANs and the translated VLAN. The vlan-id-list argument
is specified in the format of { vlan-id }&<1- 1 0>, where &<1- 1 0> indicates that you can specify up to ten
Description
Interface information.
Original outer VLAN.
Original inner VLAN.
Translated outer VLAN.
Translated inner VLAN.
164

Advertisement

This manual also for:

5920 series

Comments to this Manuals

Symbols: 0
Latest comments: