Interface; Jumboframe Enable - HP 5900 series Command Reference Manual

undo flow-interval
Views
Ethernet interface view
Predefined user roles
network-admin
Parameters
interval: Sets the statistics polling interval, in seconds. The interval is in the range of 5 to 300 and must
be a multiple of 5.
Examples
# Set the statistics polling interval to 100 seconds on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] flow-interval 100

interface

Use interface to enter interface view.
Syntax
interface interface-type interface-number
Views
System view
Predefined user roles
network-admin
Parameters
interface-type: Specifies an interface type.
interface-number: Specifies an interface number.
Examples
# Enter Ten-GigabitEthernet 1/0/1 interface view.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1]

jumboframe enable

Use jumboframe enable to allow jumbo frames within the specified length to pass through.
Use undo jumboframe enable to prevent jumbo frames from passing through.
Syntax
jumboframe enable [ value ]
undo jumboframe enable
19