Download Print this page

HP 5900 series Command Reference Manual: Display Lldp Neighbor-information

Layer 2 - lan switching.
Hide thumbs


ID type
Protocol ID
CoS map
Auto-negotiation supported
Auto-negotiation enabled
Power port class
PSE power supported
PSE power enabled
PSE pairs control ability
Power pairs
Port power classification
Link aggregation supported
Link aggregation enabled
Aggregation port ID

display lldp neighbor-information

Use display lldp neighbor-information to display the LLDP information carried in LLDP TLVs sent from the
neighboring devices.
display lldp neighbor-information [ interface interface-type interface-number [ verbose ] | list
[ system-name system-name ] | verbose ]
Any view
Predefined user roles
Application protocol number type:
APP protocol.
TCP or UDP port.
Application protocol number.
Application protocol-to-CoS mapping.
Indicates whether auto-negotiation is supported on the port.
Indicates whether auto-negotiation is enabled on the port.
Speed and duplex state of the port.
PoE device type:
PSE—Power sourcing equipment.
PD—Powered device.
Indicates whether the device can operate as a PSE.
Indicates whether the device is operating as a PSE.
Indicates whether the PSE-PD pair control is available.
PoE mode:
Signal—PoE over signal lines.
Spare—PoE over spare lines.
Port power classification of the PD:
Class 0.
Class 1.
Class 2.
Class 3.
Class 4.
Indicates whether link aggregation is supported on the port.
Indicates whether link aggregation is enabled on the port.
Member port ID, which is 0 when link aggregation is disabled.



This manual also for:

5920 series

Comments to this Manuals

Symbols: 0
Latest comments: