HP 5900 series Command Reference Manual page 200

Syntax
lldp tlv-enable { basic-tlv { all | management-address-tlv [ ip-address ] | port-description |
system-capability | system-description | system-name } | dot1-tlv { all | dcbx | port-vlan-id |
protocol-vlan-id [ vlan-id ] | vlan-name [ vlan-id ] } | dot3-tlv { all | link-aggregation | mac-physic |
max-frame-size | power } | med-tlv { all | capability | inventory | location-id { civic-address
device-type country-code { ca-type ca-value }&<1- 1 0> | elin-address tel-number } | network-policy |
power-over-ethernet } }
undo lldp tlv-enable { basic-tlv { all | management-address-tlv [ ip-address ] | port-description |
system-capability | system-description | system-name } | dot1-tlv { all | dcbx | port-vlan-id |
protocol-vlan-id [ vlan-id ] | vlan-name [ vlan-id ] } | dot3-tlv { all | link-aggregation | mac-physic |
max-frame-size | power } | med-tlv { all | capability | inventory | location-id | network-policy |
power-over-ethernet } }
Default
The device can advertise on a Ethernet port all types of LLDP TLVs except DCBX TLVs, location
identification TLVs, VLAN Name TLVs, and Protocol VLAN ID TLVs.
Views
Ethernet interface view
Predefined user roles
network-admin
Parameters
all: Advertises all basic LLDP TLVs, IEEE 802.1 organizationally specific LLDP TLVs, or IEEE 802.3
organizationally specific LLDP TLVs when the all keyword is specified for basic-tlv, dot1-tlv, or dot3-tlv; or
advertises all LLDP-MED TLVs except location identification TLVs when the all keyword is specified for
med-tlv.
basic-tlv: Advertises basic LLDP TLVs.
management-address-tlv [ ip-address ]: Advertises management address TLVs. ip-address specifies the
management address to be advertised. By default, the management address is the main IP address of the
VLAN interface that is in up state and whose corresponding VLAN ID is the lowest among the VLANs
permitted on the port. If none of the VLAN interfaces of the permitted VLANs is assigned an IP address
or all VLAN interfaces are down, no management address will be advertised.
port-description: Advertises port description TLVs.
system-capability: Advertises system capabilities TLVs.
system-description: Advertises system description TLVs.
system-name: Advertises system name TLVs.
dot1-tlv: Advertises IEEE 802.1 organizationally specific LLDP TLVs.
dcbx: Advertises the Data Center Bridging Exchange Protocol (DCBX) TLV.
port-vlan-id: Advertises port VLAN ID TLVs.
protocol-vlan-id [ vlan-id ]: Advertises port and protocol VLAN ID TLVs. The vlan-id argument specifies a
VLAN ID in the TLVs to be advertised. The VLAN ID is in the range of 1 to 4094, and the default is the
lowest VLAN ID on the port.
193