Port - HP 5900 series Command Reference Manual

Interface
XGE1/0/8
Table 33 Command output
Field
Interface
PVID
VLAN Passing
Tagged
Untagged

port

Use port to assign the specified access ports to the VLAN.
Use undo port to remove the specified access ports from the VLAN.
Syntax
port interface-list
undo port interface-list
Default
All ports are in VLAN 1.
Views
VLAN view
Predefined user roles
network-admin
Parameters
interface-list: Specifies an interface list, in the format of interface-list = { interface-type interface-number
[ to interface-type interface-number ] }&<1- 1 0>, where interface-type interface-number represents the
interface type and interface number, and &<1- 1 0> indicates that you can specify up to 10 interface-type
interface-number [ to interface-type interface-number ] parameters.
Usage guidelines
This command is applicable only on access ports.
By default, all ports are access ports. However, you can manually configure the port type. For more
information, see
Examples
# Assign Ten-GigabitEthernet 1/0/1 through Ten-GigabitEthernet 1/0/3 to VLAN 2.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2] port ten-gigabitethernet 1/0/1 to ten-gigabitethernet 1/0/3
PVID VLAN Passing
2 1-4, 6-100, 145, 177, 189-200, 244, 289, 400,
555, 600-611, 1000, 2006-2008
Description
Interface name.
Port VLAN ID.
VLANs for which the port allows packets to pass through.
VLANs for which the port sends packets without removing VLAN tags.
VLANs for which the port sends packets after removing VLAN tags.
"port link-type."
151