HP 5900 series Command Reference Manual: Display Stp Abnormal-port

Layer 2 - lan switching.
Hide thumbs

Advertisement

Field
Num of VLANs
mapped
Port times
BPDU sent
BPDU received
RegRoot ID/IRPC
Root Type
Master bridge
Cost to master
TC received
Protocol status
Protocol Std.
Version
CIST Bridge-Prio.
Max age(s)
Forward delay(s)
Hello time(s)
Max hops
Related commands
reset stp

display stp abnormal-port

Use display stp abnormal-port to display information about ports that are blocked by spanning tree
protection functions.
Syntax
display stp abnormal-port
Views
Any view
Predefined user roles
network-admin
Description
Number of VLANs that are mapped to the MSTI.
Major parameters for the port:
Hello—Hello timer.
MaxAge—Maximum age timer.
FWDly—Forward delay timer.
MsgAge—Message age timer.
RemHop—Remaining hops.
Statistics on sent BPDUs.
Statistics on received BPDUs.
MSTI regional root/internal path cost.
MSTI root type:
Primary root.
Secondary root.
MSTI root bridge ID.
Path cost from the MSTI to the master bridge.
Number of received TC BPDUs.
Spanning tree protocol status.
Spanning tree protocol standard.
Spanning tree protocol version.
Device's priority in the CIST.
Aging timer (in seconds) for BPDUs.
Port state transition delay (in seconds).
Interval (in seconds) for the root bridge to send BPDUs.
Maximum hops in the MSTI.
99

Advertisement

This manual also for:

5920 series

Comments to this Manuals

Symbols: 0
Latest comments: