HP 5900 series Command Reference Manual: Lldp Global Enable

Layer 2 - lan switching.
Hide thumbs

Advertisement

Syntax
lldp fast-count count
undo lldp fast-count
Default
The number is 3.
Views
System view
Predefined user roles
network-admin
Parameters
count: Sets the number of LLDPDUs sent each time fast LLDPDU transmission is triggered. The value range
is 1 to 10.
Usage guidelines
When fast LLDPDU transmission is enabled, the device shortens the LLDPDU transmit interval to 1 second
and restores it to the normal value after sending a certain number of LLDPDUs in succession. That number
can be changed by using this command.
Examples
# Configure the device to send four LLDPDUs each time fast LLDPDU transmission is triggered.
<Sysname> system-view
[Sysname] lldp fast-count 4

lldp global enable

Use lldp global enable to enable LLDP globally.
Use undo lldp global enable to disable LLDP globally.
Syntax
lldp global enable
undo lldp global enable
Default
LLDP is disabled globally.
Views
System view
Predefined user roles
network-admin
Usage guidelines
LLDP takes effect only when LLDP is enabled both globally and on the port.
Examples
# Disable LLDP globally.
<Sysname> system-view
187

Advertisement

This manual also for:

5920 series

Comments to this Manuals

Symbols: 0
Latest comments: