HP 5900 series Command Reference Manual: Reset Stp

Layer 2 - lan switching.
Hide thumbs

Advertisement

region-name
Use region-name to configure the MST region name.
Use undo region-name to restore the default MST region name.
Syntax
region-name name
undo region-name
Default
The MST region name of a device is its MAC address.
Views
MST region view
Predefined user roles
network-admin
Parameters
name: Specifies the MST region name, a string of 1 to 32 characters.
Usage guidelines
The MST region name, the VLAN-to-instance mapping table, and the MSTP revision level of a device
determine the device's MST region.
After configuring this command, run the active region-configuration command to activate the configured
MST region name.
Examples
# Set the MST region name of the device to hello.
<Sysname> system-view
[Sysname] stp region-configuration
[Sysname-mst-region] region-name hello
Related commands
active region-configuration
check region-configuration
display stp region-configuration
instance
revision-level
vlan-mapping modulo

reset stp

Use reset stp to clear the MSTP statistics information. The MSTP statistics information includes the numbers
of TCN BPDUs, configuration BPDUs, RST BPDUs, and MST BPDUs that are sent and received through the
specified ports.
Syntax
reset stp [ interface interface-list ]
108

Advertisement

This manual also for:

5920 series

Comments to this Manuals

Symbols: 0
Latest comments: