Port isolation commands
display port-isolate group
Use display port-isolate group to display port isolation group information.
Syntax
display port-isolate group [ group-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group-number: Specifies an isolation group number in the range of 1 to 8.
Examples
# Display all isolation groups.
<Sysname> display port-isolate group
Port isolation group information:
Group ID: 2
Group members:
Ten-GigabitEthernet1/0/1
Group ID: 5
Group members:
Ten-GigabitEthernet1/0/2
Table 19 Command output
Field
Group ID
Group members
Related commands
port-isolate enable
port-isolate enable
Use port-isolate enable to assign a port to an isolation group.
Use undo port-isolate enable to remove a port from an isolation group.
Ten-GigabitEthernet1/0/4
Description
Isolation group number.
Isolated ports in the isolation group.
89