HP 5900 series Command Reference Manual: Stp Config-digest-snooping

Layer 2 - lan switching.
Hide thumbs

Advertisement

Usage guidelines
When the setting is configured in Ethernet interface view, it takes effect on only that interface.
When the setting is configured in aggregate interface view, it takes effect on only the aggregate
interface.
When the setting is configured on a member port in an aggregation group, it takes effect only after the
port leaves the aggregation group.
Examples
# Configure Ten-GigabitEthernet 1/0/1 to send only standard-format (802.1s) MSTP packets.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] stp compliance dot1s

stp config-digest-snooping

Use stp config-digest-snooping to enable digest snooping.
Use undo stp config-digest-snooping to disable digest snooping.
Syntax
stp config-digest-snooping
undo stp config-digest-snooping
Default
The feature is disabled.
Views
Ethernet interface view, aggregate interface view
Predefined user roles
network-admin
Usage guidelines
Enable this feature both globally and on ports connected to other vendors' devices. To minimize impact,
enable the feature on all associated ports before you enable it globally.
When the setting is configured in Ethernet interface view, it takes effect on only that interface.
When the setting is configured in aggregate interface view, it takes effect on only the aggregate
interface.
When the setting is configured on a member port in an aggregation group, it takes effect only after the
port leaves the aggregation group.
Examples
# Enable digest snooping on Ten-GigabitEthernet 1/0/1 and then globally.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] stp config-digest-snooping
[Sysname-Ten-GigabitEthernet1/0/1] quit
[Sysname] stp global config-digest-snooping
112

Advertisement

This manual also for:

5920 series

Comments to this Manuals

Symbols: 0
Latest comments: