Download Print this page

HP 5900 series Command Reference Manual: Default; Description

Layer 2 - lan switching.
Hide thumbs

Advertisement

Examples
# Set the broadcast suppression threshold to 10000 kbps on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] broadcast-suppression kbps 10000
Related commands
multicast-suppression
unicast-suppression

default

Use default to restore the default settings for an Ethernet interface.
Syntax
default
Views
Ethernet interface view
Predefined user roles
network-admin
Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of the
impacts of this command when you use it in a live network.
This command might fail to restore the default settings for some commands for reasons such as command
dependencies and system restrictions. Use the display this command in interface view to identify these
commands, and then use their undo forms or follow the command reference to individually restore their
default settings. If your restoration attempt still fails, follow the error message instructions to resolve the
problem.
Examples
# Restore the default settings for interface Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] default

description

Use description to change the description of an interface.
Use undo description to restore the default.
Syntax
description text
undo description
2

Advertisement

Chapters

This manual also for:

5920 series

Comments to this Manuals

Symbols: 0
Latest comments: