D-Link xStack DGS-3620 Reference Manual page 1118

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Port Index
External PathCost : Auto/200000
Port RestrictedRole : False,
Port Forward BPDU : Enabled
MSTI Designated Bridge
----- ------------------
0 N/A
2 N/A
DGS-3620-28PC:admin#
100-4 show stp mst_config_id
Description
This command is used to display the three elements of the MST configuration Identification,
including Configuration Name, Revision Level, and the MST configuration Table. The default
Configuration name is the MAC address of the bridge. If two bridges have the same three
elements in mst_config_id, that means they are in the same MST region.
Format
show stp mst_config_id
Parameters
None.
Restrictions
None.
Example
Display the STP MST Config ID:
DGS-3620-28PC:admin#show stp mst_config_id
Command: show stp mst_config_id
Current MST Configuration Identification
----------------------------------------
Configuration Name : 00-22-22-22-22-00
MSTI ID Vid list
------- -----------
CIST 1-4094
DGS-3620-28PC:admin#
: 1 , Hello Time
, Edge Port : False/No ,
Port RestrictedTCN : False
Internal PathCost
-----------------
200000
200000
: 2 /2 , Port STP : enabled
Prio Status
---- ----------
128 Disabled
128 Disabled
Revision Level :0
1113
P2P : False/No
Role
----------
Disabled
Disabled