1-1] Slot-Dph Port Command (Kx-Tda50 Only) - Panasonic KX-TDA50 Programming Manual

2.7 [1] Configuration
Value Range
10 × n (n=1–255) s
Maintenance Console Location
2.7.28 [1-1] Slot—DPH Card Property (KX-TDA50 only)
Programming Manual References
None
Feature Manual References
1.5.9 External Sensor
2.7.29 [1-1] Slot—DPH Port Command (KX-TDA50 only)
Commands for the DPH ports can be programmed.
INS
Puts the port in service.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
2.7.29 [1-1] Slot—DPH Port Command (KX-TDA50 only)
Programming Manual References
2.7.28 [1-1] Slot—DPH Card Property (KX-TDA50 only)
Feature Manual References
None
OUS
Takes the port out of service. This enables a temporary non-use of the port, for example, for the
purpose of repair.
Default
Not applicable.
Value Range
Not applicable.
206 PC Programming Manual