6-4] Second Dial Tone - Panasonic KX-TDA50 Programming Manual

2.12 [6] Feature
Itemized Billing Code for ARS
Specifies the itemized billing code used by the ARS feature for identifying calls made with a
verification code for accounting and billing purposes.
Default
Not stored.
Value Range
Max. 10 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.12.3 [6-3] Verification Code
Programming Manual References
2.14.6 [8-5] Carrier
Feature Manual References
1.1.3 ARS (Automatic Route Selection)

2.12.4 [6-4] Second Dial Tone

A programmed Pause time can be inserted automatically between the Second Dial Tone Waiting
code and the following digits. When a programmed Second Dial Tone Waiting code is dialed after
seizing a CO line, a preprogrammed number of pauses are inserted after the code.
A maximum of 100 Second Dial Tone Waiting codes can be programmed. 20 codes are displayed at
a time. To display other sets of codes, click the applicable tab.
Second Dial Tone Waiting Code
Specifies the Second Dial Tone Waiting code.
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.12.4 [6-4] Second Dial Tone
Programming Manual References
None
Feature Manual References
1.13.4 Pause Insertion
564 PC Programming Manual