10-3] Did Table-Name Generate (Kx-Tda100/Kx-Tda200/Kx-Tda600 Only) - Panasonic KX-TDA50 Programming Manual

2.16 [10] CO & Incoming Call
Destination—Day, Lunch, Break, Night
Specifies the number of the DID destination in each time mode for the first location to be programmed.
If the same destination is to be used for all locations for a certain time mode, click the appropriate
Same all check box. If the Same all check box for a certain time mode is not clicked, the destination
numbers for subsequent locations will be generated automatically, by adding one to the value of the
previous location for that time mode.
Default
Not stored.
Value Range
For KX-TDA100/KX-TDA200:
Max. 4 digits (consisting of 0–9)
For KX-TDA600:
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.16.4 [10-3] DID Table—Automatic Registration (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
2.16.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Manual References
1.4.5 DID (Direct Inward Dialing)
2.16.5 [10-3] DID Table—Name Generate (KX-TDA100/KX-
TDA200/KX-TDA600 only)
Name Generate allows DID names to be programmed at once for a set of locations in series.
If a name generated here is longer than 20 characters, the additional characters will be discarded.
Beginning Entry Location
Specifies the number of the first location to be programmed.
Default
1
Value Range
1–1000
Maintenance Console Location
2.16.5 [10-3] DID Table—Name Generate (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
2.16.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)
614 PC Programming Manual