Panasonic KX-TDA50 Programming Manual page 540

2.11 [5] Optional Device
Maintenance Console Location
2.11.3 [5-3-1] Voice Message—DISA System
Programming Manual References
None
Feature Manual References
None
CO-CO with DISA—Return to DISA Top Menu by DTMF "*"
Enables a CO line caller to return to the DISA top menu by pressing " " while hearing a ringback,
reorder, or busy tone. If disabled, retrying the call is possible by pressing " ".
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
2.11.3 [5-3-1] Voice Message—DISA System
Programming Manual References
None
Feature Manual References
None
Option 2
DISA Cyclic Tone Detection
Selects the cyclic tone detection mode. Cyclic tone detection is used to determine the end of a call
for a DISA CO--to-CO line conversation established through an analog CO line.
To change DISA Cyclic Tone Detection, follow the steps below:
1.
Change DISA Cyclic Tone Detection.
2.
Set the status of the MSG card (KX-TDA50) or OPB3 card (KX-TDA100/KX-TDA200/KX-
TDA600) to "OUS", then "INS".
Default
Fixed
Value Range
Fixed: The number of times of a tone pattern (a set of tone-on and tone-off) that the PBX receives is
fixed to 4 times in the ranges of:
540 PC Programming Manual