10-5] Miscellaneous - Panasonic KX-TDA50 Programming Manual

2.16 [10] CO & Incoming Call
Value Range
Max. 20 characters
Maintenance Console Location
2.16.5 [10-3] DID Table—Name Generate (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
2.16.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Manual References
1.4.5 DID (Direct Inward Dialing)
Name Suffix
Specifies the text to be included at the end of each DID name.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.16.5 [10-3] DID Table—Name Generate (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
2.16.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Manual References
1.4.5 DID (Direct Inward Dialing)

2.16.6 [10-5] Miscellaneous

The Intercept Routing feature can activate when the destination of an incoming CO line call is
unavailable, or when there is no destination for the call, to reroute the call to an alternate destination.
Intercept—Intercept Routing - Busy (Destination is busy)
Enables the Intercept Routing—Busy feature to activate when the original destination is busy.
Default
Disable (Busy Tone)
Value Range
Disable (Busy Tone): Sends a busy tone to the caller. (However, a call through an LCOT/ELCOT or
T1 [LCOT/GCOT] card will ring at the original destination while the caller hears a ringback tone.)
Enable: Redirects the call to the intercept destination
616 PC Programming Manual