Panasonic KX-TDA50 Programming Manual page 593

Network Operator Extension No.
Specifies the number of an extension at the monitor PBX (the PBX whose Network BLF Data
Transmission for Centralised Operator Feature—Network PBX ID is set to 1 in 2.15.2 [9-2]
Network Data Transmission). Any extension at the monitor PBX can be specified here.
Default
Not stored.
Value Range
Max. 16 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.15.3 [9-3] Network Operator (VoIP)
Programming Manual References
2.15.2 [9-2] Network Data Transmission—Network BLF Data Transmission for Centralised Operator
Feature—Network PBX ID
Feature Manual References
1.13.14 Private Network Features—NDSS (Network Direct Station Selection)
IP-GW Card Slot No. to notify BLF data to Network Operator
Specifies the slot number (with the KX-TDA600, shelf and slot number) of the card used to send
extension status data. This setting is only required when using VoIP to transmit data.
Default
Undefined
Value Range
For KX-TDA50:
Undefined, 5–7
For KX-TDA100/KX-TDA200:
Undefined, 1–11
For KX-TDA600:
Undefined, 1-1–4-11
Maintenance Console Location
2.15.3 [9-3] Network Operator (VoIP)
Programming Manual References
None
Feature Manual References
1.13.14 Private Network Features—NDSS (Network Direct Station Selection)
2.15 [9] Private Network
PC Programming Manual 593