Programming Manual References
None
Feature Manual References
1.9.10 INCOMING CALL FEATURES
1.9.16 ISDN (INTEGRATED SERVICES DIGITAL NETWORK) FEATURES
1.13.12 PRIVATE NETWORK FEATURES
CPC Detection (DID)—Outgoing, Incoming (for DID channel)
Specifies the length of time required by the PBX to detect a CPC signal on outgoing or incoming CO
line calls before disconnecting the line. When None is selected here, the line will not be disconnected
when a CPC signal is not detected.
Default
160 ms
Value Range
None, 80 × n (n=2–75) ms
Maintenance Console Location
2.7.17 [1-1] Slot—T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
1.3.20 CPC (Calling Party Control) Signal Detection
CPC Detection (LCO/GCO)—Outgoing, Incoming (for GCOT or LCOT
channel)
Specifies the length of time required by the PBX to detect a CPC signal on outgoing or incoming CO
line calls before disconnecting the line. When None is selected here, the line will not be disconnected
when a CPC signal is not detected.
Default
160 ms
Value Range
None, 8 × n (n=2–112) ms
Maintenance Console Location
2.7.17 [1-1] Slot—T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
2.7 [1] Configuration
PC Programming Manual
173