Panasonic KX-TDA50 Programming Manual page 64

2.5 Utility
2 copies of each of the main system files can be stored on the SD memory card. The names of these
files are as follows:
KX-TDA50
File Name
DSSYS
DSSYS_S
PSMPR
PSMPR_S
KX-TDA100/KX-TDA200
File Name
DSYS
DSYS_SUB
PMPR
PMPR_SUB
KX-TDA600
File Name
DLSYS
DLSYS_S
PLMPR
PLMPR_S
When new DSYS/DSSYS/DLSYS and PMPR/PSMPR/PLMPR files are transferred from a connected
PC to the SD memory card using the File Transfer PC to PBX (SD Card) utility (see 2.5.2 Utility—
File Transfer PC to PBX (SD Card)), they are stored as the backup files. To use these files on the
PBX, it is necessary to first swap them with the currently active files on the SD memory card.
Requirements
• This utility only functions on PBXs version 1.005 and later.
• On earlier versions, the reset request confirmation screen will be displayed, and files will not
be updated.
To update system files and reset the PBX
1.
From the Utility menu, point to System Reset and then click Reset by the Command.
2.
Choose whether to back up current system data or not.
64 PC Programming Manual
Description
Main system data file. Contains all of the current configuration data
for the PBX.
Backup main system data file
PBX program file. Contains the software to run the MPR board of
the PBX.
Backup PBX program file
Description
Main system data file. Contains all of the current configuration data
for the PBX.
Backup main system data file
PBX program file. Contains the software to run the MPR board of
the PBX.
Backup PBX program file
Description
Main system data file. Contains all of the current configuration data
for the PBX.
Backup main system data file
PBX program file. Contains the software to run the EMPR board of
the PBX.
Backup PBX program file