Panasonic KX-TDA50 Programming Manual page 187

1.
Open 2.7.22 [1-1] Slot—IP-Extension Card Property (KX-TDA100/KX-TDA200/KX-
TDA600 only), and confirm that the IP address and subnet mask settings of the IP-EXT16
card are correct.
2.
Open 2.8.20 [2-12] IP Extension Settings (KX-TDA100/KX-TDA200/KX-TDA600 only),
and set the gateway address.
Registration
Follow the steps below to register the IP-PT.
1.
Connect the IP-PT to be registered to the network and, if necessary, the power supply.
2.
Click Registration.
A dialog box will appear. Non-registered (available) extension numbers are displayed on the
left.
3.
Highlight numbers and click the right arrow to select them for registration. Click Next.
A screen will appear with information on the current IP-PT extension number and index
number for programming.
4.
Program the relevant IP-PT.
5.
Click Next.
• If the registration is still in process, the dialog box will show "Waiting for IP-PT to
register...". Click OK.
• If the registration is successful, the dialog box will show "Registration Succeed".
If there are more IP-PTs to be registered, click Continue to resume or Cancel to
terminate the registration. If not, click Close.
Once the IP-PT is successfully registered, the status of the IP-PT will update to show
"Registered".
De-registration
Follow the steps below to de-register the IP-PT.
1.
Click De-registration.
A dialog box will appear. Registered extension numbers are displayed on the left.
2.
Highlight numbers and click the right arrow to select them for de-registration. Click Next.
A dialog box will appear.
3.
Click Confirm.
• If the de-registration is successful, the dialog box will show "De-registration Succeed".
• If the de-registration is unsuccessful, the dialog box will show "De-registration Error".
De-registration will be terminated.
4.
Click Close.
If the IP-PT is successfully de-registered, the status of the IP-PT will update to show "None".
Forced De-registration
Follow the steps below to forcibly de-register the IP-PT when normal de-registration has been
unsuccessful or IP address settings have been changed or deleted only on the IP-PT.
1.
Click Forced De-registration.
A dialog box will appear. Registered extension numbers are displayed on the left.
2.7 [1] Configuration
PC Programming Manual 187