Panasonic KX-TDA50 Programming Manual page 78

2.7 [1] Configuration
3.
Click Yes to confirm.
The card will be removed.
To change the status (INS/OUS) of a card (Interactive mode only)
1.
Move the mouse pointer over the card.
A menu will be shown under the mouse pointer.
2.
Select the desired status:
• Click INS to set the card to in-service status.
• Click OUS to set the card to out-of-service status.
To install an option card on an OPB3 card
1.
Move the mouse pointer over the card.
A menu will be shown under the mouse pointer.
2.
Select Option Card.
The OPB3 Option Card Setup screen will be displayed. See 2.7.26 [1-1] Slot—OPB3 Option
Card Setup (KX-TDA100/KX-TDA200/KX-TDA600 only).
Slot Type (KX-TDA50 only)
Indicates the type of each slot (reference only).
Default
Not applicable.
Value Range
Fixed Slot: For initially installed 4 Super Hybrid ports
Free Slot Type A (02–04): For LCOT4/DLC4/HLC4/PLC4/SLC4 card
Free Slot Type B (05–07): For DLC8/PLC8/SLC8/IPGW4 card
Option Slot (08–09): For MSG2/DPH4/ECHO8/EXT-CID/SVM2 card
Option Slot (10–11): For MSG2/ECHO8/EXT-CID/SVM2 card
Maintenance Console Location
2.7.1 [1-1] Slot
Installation Manual References
2.2.6 Installing/Removing the Optional Service Cards
Programming Manual References
None
Feature Manual References
None
Card Type
Indicates the type of service card that can be installed to the PBX.
KX-TDA600: CTI-LINK cards can only be installed in the Basic Shelf.
78 PC Programming Manual