Panasonic KX-TDA50 Programming Manual page 651

– Distribution Method (KX-TDA100/KX-TDA200/KX-TDA600 only)
– DID/TIE—Remove Digit
– DID/TIE—Additional Dial
• 2.16.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Manual Reference
1.4.5 DID (Direct Inward Dialing)
DIL (Direct In Line)
• 2.16.2 [10-2] DIL Table & Port Settings—DIL
– DIL Destination—Day, Lunch, Break, Night
– Tenant Number
– VM Trunk Group
Feature Manual Reference
1.4.6 DIL (Direct In Line)
DISA (Direct Inward System Access)
• 2.8.4 [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf
– DISA—Delayed Answer Timer
– DISA—Mute & OGM Start Timer after Answering
– DISA—No Dial Intercept Timer
– DISA—2nd Dial Timer for AA
– DISA—Intercept Timer—Day, Lunch, Break, Night
– DISA—Disconnect Timer after Intercept
– DISA—CO-to-CO Call Prolong Counter
– DISA—CO-to-CO Call Prolong Time
– DISA—Progress Tone Continuation Time before Recording Message
– DISA—Reorder Tone Duration
• 2.8.4 [2-3] Timers & Counters—Miscellaneous—Extension PIN—Lock Counter
• 2.8.11 [2-7-1] Class of Service—COS Settings—Extension Feature—Accept the Call from
DISA
• 2.9.1 [3-1-1] Trunk Group—TRG Settings—Tone Detection
– DISA Tone Detection—Silence
– DISA Tone Detection—Continuous
– DISA Tone Detection—Cyclic
• 2.9.1 [3-1-1] Trunk Group—TRG Settings—Intercept—Intercept Destination—Day, Lunch,
Break, Night
• 2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 1—Intercept Destination—
Day, Lunch, Break, Night
• 2.10.10 [4-2-1] Portable Station—Extension Settings—Option 1—Intercept Destination—
Day, Lunch, Break, Night
• 2.11.3 [5-3-1] Voice Message—DISA System
• 2.11.4 [5-3-2] Voice Message—DISA Message
• 2.12.1 [6-1] System Speed Dial
– CO Line Access Number + Telephone Number
– CLI Destination
3.1 Feature Programming References
PC Programming Manual 651