Card Status - Panasonic KX-TDA50 Programming Manual

Area
PBX System Data
Version
6. Main Screen
Displays the screens selected from 4. System Menu above.
For details, see Sections 2.7 [1] Configuration to 2.17 [11] Maintenance.
Standard Buttons and Elements
There are several standard buttons that are displayed on many screens within the Maintenance
Console.
The standard buttons are as follows:
Button
OK
Cancel
Close
Apply
Refresh
Help
In addition, many screens within the software display a small open folder icon (
setting items. Clicking this icon will collapse part of the list, allowing other items to be displayed. The
icon will change to a closed folder (
Clicking the closed folder icon will expand the list again.
2.1.4

Card Status

Certain tools, utilities and settings require that the target card be set to out-of-service (OUS) or in-
service (INS) status before the operation is carried out. Where required, this is noted in the
description of each item. Card status changes can only be performed when the software is in
Interactive mode (see 2.1.1 Starting Maintenance Console and Software Modes).
• "In service" means that the card is installed correctly in the PBX, and is capable of being
used normally.
• "Out of service" means that the card is installed correctly in the PBX, but has been
temporarily removed from use. This allows settings to be modified or software to be
upgraded.
• "Fault" means that the card is not installed in the PBX correctly, or is not functioning correctly.
For more information, see the Installation Manual.
Values
Versionxxx-xxx
Function
Implements changes and closes the current screen.
Abandons changes and returns to the previous screen.
Keeps any changes implemented, and closes the current screen.
Implements changes and remains on the same screen.
Implements changes, updates displayed data, and remains on the
current screen.
Displays the relevant help topic for the current screen.
).
Description
Displays the version number of the
system software installed to the PBX.
The first 3 digits are the version number,
and the last 3 digits are the revision
number.
PC Programming Manual
2.1 Introduction
) beside lists of
27