Panasonic KX-TDA50 Programming Manual page 74
Hybrid ip-pbx
Hide thumbs
Also See for KX-TDA50:
- Pc programming manual (834 pages) ,
- Programming manual (726 pages) ,
- Features manual (668 pages)
Table of Contents
Advertisement
2.6 Help
A
•
From the 2.7.14 [1-1] Slot—PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
screen, set the Port Type of the port you want to use to either "QSIG-Slave" or "QSIG-
Master".
Q
How do I change the type of an extension port?
A
•
Set the port to OUS status. Then, change DPT Type—Type (for DPT or S-Hybrid port)
in the 2.7.5 [1-1] Slot—Extension Port window.
Q
I have set the type of an extension port to "DSS Console", but I cannot apply
this setting. (Error E000402)
A
•
The number entered in DPT Type—Location No. (for DPT or S-Hybrid port) on the
2.7.5 [1-1] Slot—Extension Port screen is the same as that entered for another DSS
Console. Change this so that the numbers do not overlap.
Q
I have set the type of an extension port to "VM (DPT)", but I cannot apply this
setting. (Error E000403)
A
•
The DPT Type—VM Unit No. (for DPT or S-Hybrid port) and DPT Type—VM Port No.
(for DPT or S-Hybrid port) settings entered on the 2.7.5 [1-1] Slot—Extension Port
screen are the same as those entered for another VM (DPT). Change this so that the
numbers do not overlap.
Q
I have set the type of an extension port to "PC Console", but I cannot apply this
setting. (Error E000402)
A
•
The number entered in DPT Type—Location No. (for DPT or S-Hybrid port) on the
2.7.5 [1-1] Slot—Extension Port screen is the same as that entered for another PC
Console. Change this so that the numbers do not overlap.
Q
What programming do I have to perform to use a headset with an extension?
A
•
Set Headset OFF/ON (for DPT, DPT(S-DPT), S-Hybrid, or S-Hybrid(S-DPT) port) on
the 2.7.5 [1-1] Slot—Extension Port screen to "Headset ON".
Q
What programming do I have to perform to use XDP with an extension port?
A
•
Set XDP Mode (for S-Hybrid port) on the 2.7.5 [1-1] Slot—Extension Port screen to
"On".
Q
How do I edit a Class of Service, or create a new Class of Service?
A
•
Class of Service feature restrictions can be set from the 2.8.11 [2-7-1] Class of
Service—COS Settings screen.
Q
How do I restrict calls between 2 extensions?
A
•
Calls between extensions can be restricted from the 2.8.13 [2-7-3] Class of Service—
Internal Call Block screen. Click in the relevant cells to select the COS levels whose
extensions are blocked from calling each other.
Q
How do I restrict CO line calls made by extensions?
74
PC Programming Manual
Hide quick links:
Advertisement
Table of Contents
