Panasonic KX-TDA50 Programming Manual page 76

2.6 Help
Q I cannot set system speed dialing numbers from PC Console.
A • Set the COS of the extension to which PC Console is connected to Manager class, by
setting Manager on the Extension Feature tab of the 2.8.11 [2-7-1] Class of Service—
COS Settings screen to "Enable".
• System speed dialing numbers can only be edited by one PC Console at a time.
Q I have set FWD through system programming, but calls are still not being
forwarded.
A • Perform the following steps:
1.
2.
3.
76 PC Programming Manual
Check that the Call from CO—Present Button Status or Call from Extension—
Present Button Status of the target extension on the 2.10.3 [4-1-2] Wired
Extension—FWD/DND or 2.10.12 [4-2-2] Portable Station—FWD / DND screen is
set to "FWD".
Create a FWD button on the target extension if one does not already exist.
Press the FWD button so that it changes to FWD status.