Panasonic KX-TDA50 Programming Manual page 647

– CLI Destination
• 2.16.2 [10-2] DIL Table & Port Settings—DIL—CLI Ring for DIL—Day, Lunch, Break, Night
• 2.16.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)—CLI Ring for DID—
Day, Lunch, Break, Night
Feature Manual Reference
1.3.12 CLI (Calling Line Identification) Distribution
CLIP (Calling Line Identification Presentation)
• 2.7.14 [1-1] Slot—PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
– CO Setting—Subscriber Number
– Supplementary Service—COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF
(Rerouting), CT, CCBS, E911
• 2.7.17 [1-1] Slot—T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Subscriber
Number
• 2.8.8 [2-6-1] Numbering Plan—Main—Features
– COLR Set / Cancel
– CLIR Set / Cancel
– Switch CLIP of CO Line / Extension (KX-TDA100/KX-TDA200/KX-TDA600 only)
• 2.8.17 [2-9] System Options—Option 4—Send CLIP of CO Caller to ISDN—when Transfer
(CLIP of Held Party)
• 2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Main—CLIP on G-DN
Button (KX-TDA100/KX-TDA200/KX-TDA600 only)
• 2.10.1 [4-1-1] Wired Extension—Extension Settings
– Main—Extension Number
– Option 1—CLIP ID
– Option 3—CLIP on Extension/CO (KX-TDA100/KX-TDA200/KX-TDA600 only)
– Option 3—CLIR
– Option 3—COLR
• 2.10.5 [4-1-4] Wired Extension—Flexible Button—Type
• 2.10.10 [4-2-1] Portable Station—Extension Settings
– Option 1—CLIP ID
– Option 3—CLIP on Extension/CO (KX-TDA100/KX-TDA200/KX-TDA600 only)
– Option 3—CLIR
– Option 3—COLR
• 2.10.13 [4-2-3] Portable Station—Flexible Button—Type
• 2.10.17 [4-3] DSS Console—Flexible Button—Type
Feature Manual Reference
1.3.13 CLIP (Calling Line Identification Presentation)
CO Line Access
• 2.7.5 [1-1] Slot—Extension Port—Connection
• 2.7.11 [1-1] Slot—LCO Port—Connection
• 2.7.14 [1-1] Slot—PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Connection
• 2.7.17 [1-1] Slot—T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Connection
• 2.7.20 [1-1] Slot—IP-GW Port—Connection
3.1 Feature Programming References
PC Programming Manual 647