1-1] Slot-Opb Card Command (Kx-Tda100/Kx-Tda200/Kx-Tda600 Only) - Panasonic KX-TDA50 Programming Manual

Feature Manual References
1.5.8 External Relay
For Sensor (EIO)—Input Signal Decision Time
Specifies the minimum duration of continuous input from the triggered sensor before the PBX
recognizes the input and makes a sensor call.
Default
1024 ms
Value Range
32 × n (n=2–255) ms
Maintenance Console Location
2.7.24 [1-1] Slot—OPB (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
2.11.7 [5-5] External Sensor
Feature Manual References
1.5.9 External Sensor
For Sensor (EIO)—Input Signal Detection Reopening Time
Specifies the length of time after the sensor has been triggered during which any further input from
the sensor will be ignored.
Default
10 s
Value Range
10 × n (n=1–255) s
Maintenance Console Location
2.7.24 [1-1] Slot—OPB (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
2.11.7 [5-5] External Sensor
Feature Manual References
1.5.9 External Sensor
2.7.25 [1-1] Slot—OPB Card Command (KX-TDA100/KX-TDA200/
KX-TDA600 only)
Commands for the service cards installed on the OPB card can be programmed.
2.7 [1] Configuration
PC Programming Manual 197