Panasonic KX-TDA50 Programming Manual page 71

A • Perform the following steps:
1.
2.
3.
Q I cannot change a feature number.
A • It is not possible to use the same number for 2 items.
The number you are trying to store cannot be used if it is already being used by:
•
•
•
•
In any of these cases, choose another number.
Q How do I change the code used to access another PBX?
A • Perform the following steps:
1.
2.
3.
4.
Q I cannot change an Other PBX Extension code.
A • It is not possible to use the same number for 2 items.
The number you are trying to store cannot be used if it is already being used by:
•
•
•
•
In any of these cases, choose another number.
Q I cannot change a feature number on the B/NA DND Call Feature screen.
A • The number you are trying to store is already being used by another call feature.
Please choose a different number.
Q How do I prevent extension numbers being automatically assigned to a newly
installed card?
A • Change New Card Installation—Automatic Extension Number Set for Extension
Card in the 2.7.31 [1-3] Option screen from "Automatic" to "Manual".
Saving Modified Data
Q Modified settings have not been updated in the PBX.
A • Click Apply or OK in the sub-menu screen.
Open the 2.8.8 [2-6-1] Numbering Plan—Main screen.
Change the value in the Dial cell of the desired feature.
Click Apply.
A feature number
An extension
A Dial setting (see 2.15.1 [9-1] TIE Table)
Quick Dialing (see 2.8.8 [2-6-1] Numbering Plan—Main—2.8.9 [2-6-2] Numbering
Plan—Quick Dial)
Open the 2.8.8 [2-6-1] Numbering Plan—Main screen.
Select the Other PBX Extension tab.
Change the value in the Dial cell of the desired feature.
Click Apply.
A feature number
An extension
A Dial setting (see 2.15.1 [9-1] TIE Table)
Quick Dialing (see 2.8.8 [2-6-1] Numbering Plan—Main—2.8.9 [2-6-2] Numbering
Plan—Quick Dial)
2.6 Help
PC Programming Manual 71