Panasonic KX-TDA50 Programming Manual page 156

2.7 [1] Configuration
COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS,
E911
Specifies whether each ISDN or QSIG supplementary service is used.
Default
No
Value Range
No, Yes
Maintenance Console Location
2.7.14 [1-1] Slot—PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
1.3.13 CLIP (Calling Line Identification Presentation)
1.13.19 Private Network Features—QSIG—CF (Call Forwarding)
1.13.20 Private Network Features—QSIG—CLIP/COLP (Calling/Connected Line Identification
Presentation) and CNIP/CONP (Calling/Connected Name Identification Presentation)
1.13.21 Private Network Features—QSIG—CT (Call Transfer)
1.13.18 Private Network Features—QSIG—CCBS (Completion of Calls to Busy Subscriber)
CCBS Type
Selects the type of call from the network initiated by the CCBS (Completion of Calls to Busy
Subscriber) feature, from which the specified number of digits are deleted.
CCBS delete digits on this screen specifies the number of digits to delete from the received number.
Default
ALL
Value Range
ALL, Unknown, International, National, Network specific, Subscriber, Abbreviated
Maintenance Console Location
2.7.14 [1-1] Slot—PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
1.13.18 Private Network Features—QSIG—CCBS (Completion of Calls to Busy Subscriber)
156 PC Programming Manual