Panasonic KX-TDA50 Programming Manual page 583

Value Range
Max. 32 digits (consisting of 0–9, *, #, and P [Pause])
Maintenance Console Location
2.14.6 [8-5] Carrier
Programming Manual References
None
Feature Manual References
1.1.3 ARS (Automatic Route Selection)
TRG 01–TRG 64 (KX-TDA50/KX-TDA100/KX-TDA200), or TRG 01–TRG 96
(KX-TDA600)
Selects the trunk groups that connect to the carrier.
TRG 01–TRG 64 (KX-TDA50/KX-TDA100/KX-TDA200), or TRG 01–TRG 96
(KX-TDA600)
Enables each trunk group for each carrier. If a cell is highlighted in blue, that trunk group is enabled
for use with that carrier.
Default
Trunk groups 01–04: OFF
All other trunk groups: ON
Value Range
OFF (white), ON (blue)
Maintenance Console Location
2.14.6 [8-5] Carrier
Programming Manual References
None
Feature Manual References
1.1.3 ARS (Automatic Route Selection)
Authorization Code for Tenant
Specifies an Authorization code for each tenant. The Authorization codes can be added to the user-
dialed number by specifying "A" command in Modify Command on the Carrier tab.
Authorization Code for Tenant—Tenant 1–Tenant 8
Specifies the Authorization code of each carrier for each tenant.
2.14 [8] ARS
PC Programming Manual 583