Panasonic KX-TDA50 Programming Manual page 644

3.1 Feature Programming References
–
–
• 2.12.1 [6-1] System Speed Dial
• 2.12.2 [6-2] Caller ID Modification
Feature Manual Reference
1.3.1 Caller ID
Call Hold
• 2.8.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone
–
–
• 2.8.8 [2-6-1] Numbering Plan—Main—Features
–
–
–
• 2.8.17 [2-9] System Options
–
–
–
Feature Manual Reference
1.3.2 Call Hold
Call Log, Incoming
• 2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Group Log / Group FWD—
Supervisor Extension Number
• 2.10.1 [4-1-1] Wired Extension—Extension Settings
–
–
–
• 2.10.5 [4-1-4] Wired Extension—Flexible Button—Type
• 2.10.10 [4-2-1] Portable Station—Extension Settings
–
–
• 2.10.17 [4-3] DSS Console—Flexible Button—Type
Feature Manual Reference
1.3.3 Call Log, Incoming
Call Monitor
• 2.8.10 [2-6-3] Numbering Plan—B/NA DND Call Feature—Call Monitor
• 2.8.11 [2-7-1] Class of Service—COS Settings—CO & SMDR—Call Monitor
• 2.10.1 [4-1-1] Wired Extension—Extension Settings
–
–
• 2.10.10 [4-2-1] Portable Station—Extension Settings—Option 3—Executive Override Deny
Feature Manual Reference
644 PC Programming Manual
Extension Caller ID Sending
Incoming Call Wait Timer for Extension Caller ID
Recall—Hold Recall
Recall—Disconnect after Recall
Call Hold / Call Hold Retrieve
Call Hold Retrieve : Specified with a Holding Extension Number
Hold Retrieve : Specified with a Held CO Line Number
Option 1—PT Operation—Automatic Hold by ICM / CO / ICD Group key
Option 1—PT Operation— Hold Key Mode
Option 4—SLT—SLT Hold Mode
Option 5—Incoming Call Display
Option 6—Incoming Call Log Lock (KX-TDA100/KX-TDA200/KX-TDA600 only)
Option 6—Incoming Call Log Memory
Option 5—Incoming Call Display
Option 6—Incoming Call Log Memory
Option 2—Data Mode
Option 3—Executive Override Deny