1-1] Slot-Card Property - Dph Type-Connection Command (Kx-Tda50 Only) - Panasonic KX-TDA200 Programming Manual

3.32 [1-1] Slot—Card Property - DPH type—
Connection Command (KX-TDA50 only)
Commands for the DPH ports can be programmed.
INS
Puts the port in service.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
3.32 [1-1] Slot—Card Property - DPH type—Connection Command (KX-TDA50 only)
Programming Manual References
3.31 [1-1] Slot—Card Property - DPH type (KX-TDA50 only)
Feature Manual References
None
OUS
Takes the port out of service. This enables a temporary non-use of the port, for example, for the purpose of
repair.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
3.32 [1-1] Slot—Card Property - DPH type—Connection Command (KX-TDA50 only)
Programming Manual References
3.31 [1-1] Slot—Card Property - DPH type (KX-TDA50 only)
Feature Manual References
None
Document Version 2008-11
3.32 [1-1] Slot—Card Property - DPH type—Connection Command (KX-TDA50 only)
PC Programming Manual 225