Panasonic KX-TDA50 Programming Manual page 318

Hybrid ip-pbx
Hide thumbs Also See for KX-TDA50:
Table of Contents

Advertisement

2.8 [2] System
Maintenance Console Location
2.8.17 [2-9] System Options
Programming Manual References
None
Feature Manual References
1.3.1 Caller ID
Private Network—Common Extension Numbering for 2 PBXs (Optional SD
Card Required)
Enables extensions at two PBXs connected in a network (not including a VoIP network) to have the
same leading number. For example, extension 101 is registered at PBX 1, and extension 102 is
registered at PBX 2. Only the Extension Number Method is supported.
If disabled, different leading numbers need to be assigned for extensions at each PBX.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
2.8.17 [2-9] System Options
Programming Manual References
2.15.1 [9-1] TIE Table—Leading Number
Feature Manual References
1.13.12 PRIVATE NETWORK FEATURES
System Wireless—Out of Range Registration
Selects whether the PBX can set the status of a PS to Out of Range if no signal is received from the
PS for a preset length of time. This feature must be enabled to allow PS roaming.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
2.8.17 [2-9] System Options
Programming Manual References
2.8.4 [2-3] Timers & Counters—System Wireless—PS Out of Range Timer
318
PC Programming Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tda100Kx-tda200Kx-tda600

Table of Contents