Panasonic KX-TDA50 Programming Manual page 549

Maintenance Console Location
2.11.5 [5-3-3] Voice Message—SVM (KX-TDA50 only)
Programming Manual References
None
Feature Manual References
1.16.5 SVM (Simplified Voice Message)
SVM Cyclic Tone Option—Tone Off Maximum Time
Specifies the maximum time that the PBX waits for a cyclic tone to be sent from the telephone
company before recognising it as a tone-off. When no tone is detected within the time set here, the
PBX recognises it as a tone-off.
Note that this option can only be set when SVM Cyclic Tone Detection on this screen is set to
"Option".
To change SVM Cyclic Tone Option, follow the steps below:
1.
Change SVM Cyclic Tone Option.
2.
Set the status of the SVM2 card to "OUS", then "INS".
Default
600 ms
Value Range
200 + 20 × n (n=1–390) ms
Maintenance Console Location
2.11.5 [5-3-3] Voice Message—SVM (KX-TDA50 only)
Programming Manual References
None
Feature Manual References
1.16.5 SVM (Simplified Voice Message)
SVM Cyclic Tone Option—Repeating Times of On/Off for Detection
Specifies the number of times the tone pattern (a set of tone-on and tone-off) must be received to
establish reception of the cyclic tone. This determines the end of call.
Note that this option can only be set when SVM Cyclic Tone Detection on this screen is set to
"Option".
Default
3
Value Range
3–16
2.11 [5] Optional Device
PC Programming Manual 549