Figure 4.28 L2 Switching > Garp > Gvrp Settings; Figure 4.29 L2 Switching > Garp > Gmrp Settings - Advantech EKI-7708 Series User Manual

4.5.6.2 GVRP Settings
The GVRP Settings page allows you to enable or disable the GVRP (GARP VLAN
Registration Protocol or Generic VLAN Registration Protocol) protocol which
facilitates control of virtual local area networks (VLANs) within a larger network.
To access this page, click L2 Switching > GARP > GVRP Settings.
The following table describes the items in the previous figure.
Item
Status
Apply
The ensuing table for GVRP Information settings are informational only: GVRP.
4.5.6.3 GMRP Settings
To access this page, click L2 Switching > GARP > GMRP Settings.
The following table describes the items in the previous figure.
Item
State
Apply
The ensuing table for GMRP Information settings are informational only: GMRP.
The ensuing table for Multicast Groups settings are informational only: VLAN ID,
MAC Address, Type and Member Ports.
Figure 4.28 L2 Switching > GARP > GVRP Settings
Description
Click to enable or disable the GARP VLAN Registration Protocol
administrative mode for the switch. The factory default is Disable.
Click Apply to save the values and update the screen.
Figure 4.29 L2 Switching > GARP > GMRP Settings
Description
Click Apply to save the values and update the screen.
56 EKI-7708 Series User Manual