Table of Contents
Advertisement
Item
Flow Control
Fiber Port
Enabled
Speed
Duplex
Flow Control
Apply
The ensuing table for Port Status settings are informational only: Port, Edit (click to
enter description), Enable State, Link Status, Speed, Duplex, FlowCtrl Config and
FlowCtrl Status.
4.5.2
Port Mirror
Port mirroring function allows the sending of a copy of network packets seen on one
switch port to a network monitoring connection on another switch port. Port mirroring
can be used to analyze and debug data or diagnose errors on a network or to mirror
either inbound or outbound traffic (or both).
There are no preset values in the Port Mirror. The displayed values do not represent
the actual setting values.
To access this page, click L2 Switching > Port Mirror.
The following table describes the items in the previous figure.
Item
Session ID
Monitor session state Click the drop-down menu to enable or disable the session mode for a
Destination Port
Allow-ingress
Sniffer RX Ports
Description
Click the radio button to enable or disable the flow control function.
Click the drop-down menu to select the port for the L2 Switch Fiber
port setting.
Click the radio-button to enable or disable the Fiber Port Setting func-
tion.
Click the drop-down menu to select the fiber port speed: Auto, Auto-
1000M, 100M, or 1000M.
Click the drop-down menu to select the duplex setting: Half or Full.
Click the radio button to enable or disable the flow control function.
Click Apply to save the values and update the screen.
Figure 4.16 L2 Switching > Port Mirror
Description
Click the drop-down menu to select a port mirroring session from the
list. The number of sessions allowed is platform specific.
selected session ID.
Click the drop-down menu to select the destination port and receive
all the traffic from configured mirrored port(s).
Click the drop-down menu to enable or disable the Allow-ingress
function.
Enter the variable to define the RX port.
46
EKI-7708 Series User Manual
Advertisement
Table of Contents
Troubleshooting
