Qos Basic Mode; Figure 4.92 Qos > Qos Basic Mode > Global Settings; Figure 4.93 Qos > Qos Basic Mode > Port Settings - Advantech EKI-7428 Series User Manual

4.8.2

QoS Basic Mode

Quality of Service (QoS) allows to give preferential treatment to certain types of traffic
at the expense of others. Without QoS, the switch offers best-effort service to each
packet, regardless of the packet contents or size sending the packets without any
assurance of reliability, delay bounds, or throughput.
QoS mode supports two modes: 802.1p and DSCP.
4.8.2.1 Global Settings
The Global Settings page allows you to configure the trust mode to a port selection.
To access this page, click QoS > QoS Basic Mode > Global Settings.
The function is only available when QoS Properties is set to Basic.
Figure 4.92 QoS > QoS Basic Mode > Global Settings
The following table describes the items in the previous figure.
Item
Trust Mode
Apply
The ensuing table for QoS Information settings are informational only: Trust Mode.
4.8.2.2 Port Settings
The Port Settings page allows you to define a trust state (enabled or disabled) to a
listed port.
To access this page, click QoS > QoS Basic Mode > Port Settings.
The following table describes the items in the previous figure.
Item
Port
Trust State
Apply
The ensuing table for QoS Port Status settings are informational only: Port and Trust
State.
EKI-7428 Series User Manual
Description
Click the drop-down menu to select the trust state of the QoS basic
mode.
Click Apply to save the values and update the screen.
Figure 4.93 QoS > QoS Basic Mode > Port Settings
Description
Enter the port number for the QoS basic mode setting.
Select Enabled or Disabled to set the port's trust state status.
Click Apply to save the values and update the screen.
92