Changing A Fax Destination - Ricoh SP 5200S Operating Instructions Manual

1. Transmission
• International TX Mode: set whether or not to use International TX Mode.
• Fax Header: specify the header that appears on your faxes when the receiver prints them.
• Label Insertion: specify label information such as the destination name that appears on your
1
faxes when the receiver prints them.
14. Press [OK].
15. Press [Exit].
16. Press the [User Tools/Counter] key.
• For details about the procedure in step 13, see "Registering Addresses and Users for Facsimile/
Scanner Functions", Network and System Settings Reference.

Changing a Fax Destination

This section explains how to change a name and fax number registered in the Address Book.
1. Press the [User Tools/Counter] key.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [Address Book Management].
112
CCS003