Hood Assembly Installation
1. Align the hood pivot brackets with holes in the pivot
bracket on the frame (Fig. 085).
Fig 085
Z580/Z589 DFI Z Master Service Manual
2. Install a clevis pin, washer and hairpin cotter into
each of the pivot brackets (Fig. 086).
Note: The hood screen can contact the radiator cap.
The pressure on the cap can result in a crack
at the cap adapter joint, resulting in loss of
radiator pressure and overheating.
Check the clearance between the hood screen
and the radiator cap. If there is any interfer
ence, the hood can be adjusted using the
slotted holes in the hood mounting brackets.
IMG-0370a
CHASSIS
Fig 086
IMG-0365a
3
3-23