Fuel Tank Installation - Toro 30284 Service Manual

Fuel Tank Installation

This procedure was done on a hydro model. The same
procedure can be followed for gear drive models.
1. Apply thread locking compound to the fuel tank
mounting studs (Fig. 0252).
Fig 0252
2. Install the threaded studs into the left side fuel tank
mounting locations. Leave 1-1/8" (28.5mm) of thread
protruding from the tank (Fig. 0253).
Fig 0253
Floating Deck Mid-Size Service Manual
3. Install the bulkhead fuel fi tting into the tank through
the fuel cap opening (Fig. 0254).
Note: The fi tting should be installed so that the barb
of the fi tting points toward the front of the fuel
tank.
Note: A fl exible magnet tool used to aid installation.
PICT-0538a
4. Install a washer and nut onto the bulkhead fi tting
(Fig. 0255).
PICT-0545
CHASSIS
Fig 0254 PICT-5356
Fig 0255 PICT-5363
3
3-67